{"id":20885,"date":"2025-06-02T17:29:12","date_gmt":"2025-06-02T09:29:12","guid":{"rendered":"https:\/\/www.yoroow.com\/?p=20885"},"modified":"2025-06-02T17:29:12","modified_gmt":"2025-06-02T09:29:12","slug":"easy-diy-guide-installing-a-2-piece-concealed-shower-system","status":"publish","type":"post","link":"https:\/\/www.yoroow.com\/de\/blog-detail\/easy-diy-guide-installing-a-2-piece-concealed-shower-system\/","title":{"rendered":"Einfache DIY-Anleitung: Installation eines 2-teiligen Unterputz-Duschsystems"},"content":{"rendered":"
The concealed shower set 2 piece<\/a>, with its modern hidden installation design, has become a popular choice for high \u2013 end residences, hotels, and contemporary bathrooms. Its sleek wall appearance and comfortable user experience rely not only on the high \u2013 quality products themselves but also on standardized installation processes. This article elaborates on the installation steps and precautions for the concealed shower set 2 piece, helping users create a safe and aesthetically pleasing bathroom space.<\/span><\/span>\u200b<\/span><\/div>\n

I Pre \u2013 installation Notes<\/span><\/span>\u200b<\/span><\/h3>\n
Before installation, carefully check all product components. The standard two \u2013 piece set includes a concealed shower faucet, a top spray showerhead, installation brackets, sealing materials (Teflon tape or sealant), fixing screws, and an instruction manual. Meanwhile, ensure that the installation environment meets the requirements: the wall should be a load \u2013 bearing wall or solid brick wall to support the weight of the faucet and showerhead; plan the in \u2013 wall pipe layout in advance and reserve cold and hot water interfaces with a spacing of 150mm (center distance), which conforms to international standards. Products from Chinesische Wasserhahnhersteller<\/a> support OEM customization, allowing adjustment of size specifications according to different market needs. Users should verify that the customized parameters match the existing pipelines before installation.<\/span><\/span>\u200b<\/span><\/div>\n

II Erforderliche Installationswerkzeuge<\/span><\/span>\u200b<\/span><\/h3>\n
The following tools are needed for the installation process: an electric drill (with corresponding drill bits), a spirit level, a tape measure, a wrench (adjustable or special socket), Teflon tape, sealant, a pencil, a screwdriver (Phillips\/slotted), and a pipe cutter (if pipeline length adjustment is required). High \u2013 precision measuring tools are recommended to ensure accurate installation positioning and improve installation efficiency.<\/span><\/span>\u200b<\/span><\/div>\n

III Pre \u2013 installation Steps<\/span><\/span>\u200b<\/span><\/h3>\n

\"\"<\/a>1.Turn off the water supply: Be sure to close the main water valve at home or the water supply valve in the bathroom area and empty the remaining water in the pipeline to prevent leakage during installation.\u200b<\/p>\n

2.Check component compatibility: Verify the interface specifications of the shower faucet and top spray showerhead (commonly G1\/2 or NPT threads) to ensure they match the pre \u2013 embedded pipeline interfaces. Products manufactured by Chinese factories are made of high \u2013 quality brass or 304 stainless steel, with surface treatments including chrome plating, matte black, brushed gold, etc. During installation, pay attention to protecting the surface coating to avoid scratches from tools.\u200b<\/p>\n

\n3.Mark installation positions: Use a spirit level and tape measure to mark the installation heights of the faucet handle and top spray showerhead on the wall. Generally, the center height of the faucet handle is recommended to be set at 900 \u2013 1100mm, and the center height of the top spray showerhead at 2000 \u2013 2200mm, which conforms to ergonomic design.<\/p>\n

IV Standard-Installationsverfahren<\/span><\/span>\u200b<\/span><\/h3>\n

\"\"<\/a>1.Fix pre \u2013 embedded pipelines: For new walls, fix the cold and hot water pipelines at the marked spacing before plastering, and wrap the outer side of the pipelines with thermal insulation or anti \u2013 corrosion layers. For renovation projects, ensure that the in \u2013 wall pipeline interfaces are flat, free of rust or blockages.\u200b<\/span><\/h3>\n


\n2.Install the faucet embedment box: Embed the concealed faucet\u2019s embedment box into the wall, adjust it to a horizontal state using a spirit level, and then fix it with expansion screws. The embedding depth of the embedment box should ensure that the faucet body is flush with the wall, highlighting the simplicity and beauty of the hidden design.\u200b<\/span><\/h3>\n


\n3.Connect cold and hot water pipelines: Wrap 5 \u2013 6 turns of Teflon tape clockwise around the faucet interface, and then tighten the faucet body with the pre \u2013 embedded pipeline to ensure a tight connection and no leakage. Although products from Chinese factories have undergone pressure testing before leaving the factory, the tightness of the connection parts still needs to be manually checked during on \u2013 site installation.\u200b<\/span><\/h3>\n


\n4.Fix the top spray shower bracket: Drill holes on the wall according to the marked height, install expansion screws to fix the bracket, and ensure the bracket is perpendicular to the wall. Connect the top spray showerhead to the bracket, adjust the angle to horizontal, and then tighten the fixing screws. Some models are equipped with rotatable joints, allowing adjustment of the water outlet direction as needed.\u200b<\/span><\/h3>\n

V Usage Testing and Inspection Points<\/span><\/span>\u200b<\/span><\/h3>\n
After installation, a comprehensive test is required:<\/span><\/span>\u200b<\/span><\/div>\n
\n
    \n
  1. Water flow test<\/span><\/span>: Slowly turn on the water supply and check if the faucet switch is smooth and if the top spray showerhead emits water evenly. The rain \u2013 style water outlet mode should evenly cover the entire body without local leaks or waterless dead spots.<\/span><\/span>\u200b<\/span><\/li>\n<\/ol>\n<\/div>\n
    \n
      \n
    1. Leakage detection<\/span><\/span>: After turning off the water supply, carefully observe if there are water droplets seeping from the interfaces, especially focusing on the connections between the faucet and embedment box, and the shower bracket and wall. If leakage is found, turn off the water supply and re \u2013 wrap Teflon tape or apply sealant.<\/span><\/span>\u200b<\/span><\/li>\n<\/ol>\n<\/div>\n
      \n
        \n
      1. Thermostatic function test (if available)<\/span><\/span>: For models with a thermostatic control system, test the water temperature stability. When adjusting the temperature, there should be no obvious fluctuations to ensure safe use.<\/span><\/span>\u200b<\/span><\/li>\n<\/ol>\n<\/div>\n

        VI Common Installation Issues and Solutions<\/span><\/span>\u200b<\/span><\/h3>\n
        \n